Battery Maintenance

Removing and Replacing the Battery Module

WARNING: To prevent personal injury, prepare the area and observe all materials-handling procedures for removing the battery module, which weighs 27 kg (60 lb).

27kg

60 lb

To remove the battery module:

1. Remove the front bezel by pulling on both ends.

Figure 4-2: Removing the front bezel

2.Remove the two screws that secure the battery module in place (1) and slide out the battery module (2).

2

1

Figure 4-3: Removing the battery module

3.Set aside the used battery module for proper disposal. Refer to the section, “Disposing of Used Batteries,” in this chapter.

4.To replace the battery module, reverse the preceding steps.

4-4

HP Uninterruptible Power System R12000 XR Models User Guide