LCD Configuration and Status

The Parallel Mode menu options allow you to configure the UPS mode of operation, as described in Table 3-11.

Table 3-11: Parallel Mode Choices

LCD Display

Explanation

Parallel Mode

Select this option to configure the UPS for capacity operation.

 

 

For Capacity

 

 

 

Parallel Mode

Select this option to configure the UPS for redundant operation.

 

 

N+1 Redundancy

 

 

 

Setting the Language

Select Set Language from the System Setup menu to select from seven different languages for the menu display. The available choices are English, Francais, Deutsch, Espanol, Japanese, Nederlands, and Italiano. The asterisk (*) indicates the current configuration.

System Setup

Set Language

Setting the Password

Select Set Password from the System Setup menu to set the password.

System Setup

Set Password

To access some of the more critical UPS operations, you must have a password. Use the Center and Enter buttons to select the six digits for the password [0-9 and A-Z].

NOTE: The password must be six characters long. The default password is COMPAQ.

Enter Password

COMPAQ

1.Select the first digit using the up and down arrow keys on the Center button.

2.Press the right arrow key on the Center button to move to the next digit.

3.To change a digit, use the left arrow key on the Center button to go back.

4.After entering the entire password, press the Enter button.

IMPORTANT: Record your password. After 30 minutes with no key presses, security is automatically restored and the display changes to the main status display.

3-14

HP Uninterruptible Power System R12000 XR Models User Guide