LCD Configuration and Status

Displaying the Battery Charge Data

Select Battery Data on the Main Menu to display the amount of charge on the battery in 10 percent increments.

Main Menu

Battery Data

When the UPS goes into Battery mode, the following LCD displays.

Battery Discharge

❚❚❚ 1h=

The remaining battery energy is shown, where the tag “1h=” means that each block represents one hour. For example, this LCD shows three hours of remaining battery time. Other possible tags are listed in Table 3-6.

Table 3-6: Possible Tags

Tag Time

1m 1 minute per block

5m 5 minutes per block

10m 10 minutes per block

30m 30 minutes per block

1h 1 hour per block

Setting the Time

Select Set Time from the Main Menu to set the correct time.

Main Menu

Set Time

Setting the Date

Select Set Date from the Main Menu to set the correct date.

Main Menu

Set Date

3-10

HP Uninterruptible Power System R12000 XR Models User Guide