LCD Configuration and Status

Changing the System Setup Options

Select System Setup from the Main Menu to enter the menu for changing system setup options.

Main Menu

System Setup

To change the system setup, you must enter the correct password. Use the Center and Enter buttons to select the six digits for the password [0-9 and A-Z].

NOTE: The password must be six characters long. The default password is COMPAQ. To establish or change the password, refer to the section, “Setting the Password,” in this chapter.

Enter Password

COMPAQ

1.Select the first digit using the up and down arrow keys on the Center button.

2.Press the right arrow key on the Center button to move to the next digit.

3.To change a digit, use the left arrow key on the Center button to go back.

4.After entering the entire password, press the Enter button.

IMPORTANT: Record your password. After 30 minutes with no key presses, security is automatically restored and the display changes to the main status display.

Setting the Baud Rate

Select Comm Setup from the System Setup menu to set up the baud rate for the communication ports and option slots.

 

 

System Setup

 

 

 

 

 

 

 

 

Comm Setup

 

 

 

 

 

Table 3-8: Communications Setup Choices

 

 

 

LCD Display

 

Explanation

 

 

 

Comm Setup

 

Select the communication port to set up. x is either 1 or 2.

 

 

 

 

Serial Port x

 

 

 

 

 

 

Comm Setup

 

Select the option slot to set up. x is either 1 or 2.

 

 

 

 

Opt-Slot x

 

 

 

 

 

 

 

 

3-12

HP Uninterruptible Power System R12000 XR Models User Guide