HP Tape manual Hp surestore dlt1e, Non-operating limits storage ranges, Dlt1e

hp surestore DLT1e

hp learning products

http://www.hp.com/support/tape may have a later version

data protection
		hp surestore dlt1e
contact hp
home page
before you start
	contents of this section
operation
cartridge care			features
cleaning
			specifications
specifications
dlt1i			physical specification
dlt1e			power requirements
media compatibility			performance
diagnostics			operating limits

troubleshooting	non-operating limits
FAQs
	safety and electromagnetic compatibility

SCSI configuration

UNIX configuration

ordering supplies

features

The HP Surestore DLT1 tape drive provides affordable 80GB backup to IT managers with mid-range servers. The 6MB/s compressed transfer rate provides backup in under 4 hours. DLT technology appeals to customers looking for reliable and scalable backup.

Your new tape drive provides the following key features:

●Proven DLT technology

●Up to 80GB (compressed) on a single tape cartridge

●Transfer rate of 6MB/s (compressed)

●Read compatible with DLT4000 data

●Technology scalable to higher capacities and transfer rates

●Compatibility with all key backup software applications

●TapeSense System™ to improve reliability by rejecting damaged media

●Roller design to minimize lateral tape movement

●TapeAlert support for worry-free backup

●HP Library & Tape Tools software to verify successful installation and troubleshoot problems

●Ultra wide SCSI-2 interface

●3-year, next-day, unit exchange

Note: HP Surestore DLT1e does not currently support One-Button Disaster Recovery (OBDR).

specifications

physical specification

dimensions 212.85 mm (8.38") W 100.08 mm (3.94") H 273.05 mm (10.75") D

weight 4.08 kg (9 lbs)

power requirements

power 100-254 VAC

44 W, 0.76A @ 110 VAC Auto-ranging. Power connection IEC CEE-22

performance

interface	Ultra wide SCSI-2
recording format	DLT1
media	DLTtape IV
capacity	40 GB (native)
transfer rate	native 3 MB/sec
	compressed 6 MB/sec (assumes 2:1
	compression)
burst transfer rate	40 MB/sec (Ultra wide SCSI-2)
file access time (from BOT)	68 sec typical
	135 sec maximum
load to BOT	59sec (slightly longer for blank tapes)
unload from BOT	17 sec
rewind time	68 sec typical
	135 sec maximum
rewind tape speed	4.1 m/sec (160 in/sec)
operating limits
temperature	10°C to 40°C (50°F to 104°F)
humidity	20% to 80% RH (non-condensing)
	10%/hr maximum operating humidity
	rise
maximum wet bulb temperature	25°C
temperature gradient	11°C per hour (across range)
operating altitude	-0.15 to 9 km (-500 to 30,000 ft)
vibration	0.25g 5-500 Hz
shock survival	3g 10ms (half sine)

non-operating limits (storage ranges)

temperature	-40°C to 66°C (-40°F to 151°F)
humidity	10% to 95% RH (non-condensing)
temperature rise	20°C per hour with 5 degree margin
	(across range)
humidity rise	10%/hr
non-operating altitude	N/A
vibration	1g 10-500 Hz
shock survival	40G 10ms (square wave)
	140G 2ms (half sine)

safety and electromagnetic compatibility

UL 1950, 3rd edition Information Technology Equipment (ITE) CSA-C22.2 No. 950-95 Safety of Information Technology Equipment FCC Rules and Regulations, Part 15--Radio Frequency Devices, Subpart B--Unintentional Radiators, Class B

Industry Canada (ICES), Radio Interference Regulation, Digital Apparatus, Class B

C-TICK, AS/NZS A53548, Radio Frequency Devices Class B CISPR Publication 22 (1985), Class B

EN55022: 1998, CISPR Publication 22 (1997), CISPR Publication 22 (1993) (U.S.A.), Radiated and Conducted Emissions EN61000-3-2: 1995, +Amendment A1: 1998, +Amendment A2: 1998, IEC 61000-3-2: 1995, +/A1: 1997, +/A2: 1998, Harmonic Current Emissions

EN61000-3-3: 1995, IEC61000-3-3: 1994, Voltage Fluctuation and Flicker

EN55024: 1998, CISPR Publication 24 (1997), IEC61000-4-2: 1995,

IEC61000-4-3: 1995, IEC61000-4-5: 1995, IEC61000-4-6: 1996,

IEC61000-4-8: 1993, IEC61000-4-11: 1994, Immunities

CE-Mark comprised of the following requirements:

EN60950/A11: 1997, IEC60950/A4: 1996, Safety of Information

Technology Equipment including Electrical Business Equipment

EN55082-1/IEC1000-4-2, 1000-4-3, 1000-4-4, Electromagnetic

Compatibility for Industrial-Process Measurement and Control

Equipment:

Part 2 - Electrostatic Discharge (ESD) Requirements

Part 3 - Radiated Electromagnetic Field Requirements

Part 4 - Electrical Fast Transient/Burst (EFT) Requirements

© 2000, Hewlett-Packard Company

file:///C/Documents%20and%20Settings/topher.COL-SPRINGS/Desktop/manual/document/dlt1/user/reseller/eng/dlt1e.htm [12/3/2001 7:50:35 AM]