EXPLANATION OF SYMBOLS
These symbols are on the machine and in the instructions.
Study them carefully so that you know what they mean.
Read the instructions.
R N
Reverse | Neutral | Fast | Slow | Engine off | Battery | Choke | Fuel |
Oil pressure | Cutting height | Backwards | Forwards | Ignition |
Use hearing protection | Hydrostatic freewheel | Parking brake | Brake | Warning |
Noise emissions to surroundings in accordance with the European Union’s directive. The machine’s emissions are set out in the chapter TECHNICAL DATA and on the decal.
Warning! | Warning! Risk that the | Never drive across | CE conformity |
Rotating blades | machine can tip over | a slope | marking |
Never use the machine if persons, | Never carry passengers on the |
especially children, or animals, | machine or equipment |
are in the vicinity |
|
Starting instructions
Read the instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Hydrostatic pedals in neutral position
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Keep hands and feet away | Drive very slowly |
from under the hood when | without the cutting unit |
the engine is running |
|
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off the ignition cable before repairs or maintenance
4 – English
