DRIVING

5.When the engine starts release the ignition key immediately back to neutral position.

IMPORTANT INFORMATION

Do not run the starter for more than about 5 seconds at a time. If the engine does not start, wait about 15 seconds before trying again.

6.Push the choke lever gradually forward when the engine has started.

7.Set the required engine speed with the throttle control.

Let the engine run at moderate speed or half throttle for 3-5 minutes before subjecting it to heavy load.

WARNING!

Never run the engine indoors, in enclosed or poorly ventilated areas. The exhaust fumes contain toxic carbon monoxide.

Driving the machine

1.Release the parking brake by pressing the brake pedal.

2.Carefully press down one of the pedals until the required speed is obtained.

To drive forward press down pedal (1), or to reverse pedal (2).

WARNING!

Make sure that branches do not obstruct the pedals when mowing under bushes, otherwise you may lose control.

6007-205

6007-206

6007-207

6007-208

1

2

6007-209

16 – English

Page 18
Image 18
Husqvarna ProFlex 18 manual Driving the machine