PRESENTATION

Cutting unit

Rider ProFlex can be equipped with numerous attachments.

The BioClip unit finely cuts the lawn by cutting the grass several times before returning the clippings to the lawn as fertiliser.

Cutting unit with rear ejection, i.e. the grass cuttings are ejected behind the unit.

The Combi unit functions as a BioClip unit when a BioClip plug is fitted, but can be reset to rear ejection by removing the BioClip plug.

For identification of the cutting unit, see ”Maintenance \ Cutting unit models”.

Examples of the accessories for Rider ProFlex:

Brush

Snow plough

Wheel weights

Snow chains

Dozer

Edger

Electric attachment lift

BioClip cutting unit

Gravel rake

Trailer

Lift lever for cutting unit

The lift lever is used to set the cutting unit in transport or mowing position. In transport position the blade brake is activated automatically to stop the blades within around 5 seconds.

1. Pull back the lever to the locked position for transport.

The cutting unit will lift up and the blades stop rotating.

Lifting of the cutting unit

2. Press in the lock button and move the lever forwards for the mowing position.

The unit will lower down and the blades start to rotate.

3. The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn.

Lowering of the cutting unit

6004-209

6004-210

English – 13

Page 15
Image 15
Husqvarna ProFlex 18 manual Cutting unit, Lift lever for cutting unit