20 English
MAINTENANCE
Maintenance interval in
hours
Daily main-
tenance
before after
Weekly3)
main-
tenance
At least
once a
year

Maintenance schedule

The following is a list of the maintenance which should be conducted on the machine. For the items which
are not described in these instructions go to an authorised service workshop.
25 50 100 300
PageMaintenance
Check for fuel and oil leakage -
Check the parking brake 27
Check the engine oil level (when you
refuel) 48
Check the fuel pump air filter 29 ●●
Check the seat safety switch 31
Check the lift lever safety switch 31
Check the parking brake safety switch 31
Check/clean the engine cooling air intake 23 ●●
Check the cutting unit: 34
blades are secure 36
condition of blades (sharpness,
shape, etc.) 36
blade synchronisation (90° between
BioClip) 36
Check steering wires (for play, etc.) 24
Check fasteners (screws, nuts, etc.) -
Start engine and blades, listen for noise -
Clean underside of cutting unit 36
Clean transmission air intake 23 ●●
Check battery acid level 30
Check transmission oil level 49
Check the condition of belts, pulleys, etc. -
Check for damage -
Check tyre pressures (60 kPa) 27
Check for damage to wire guide at
articulated joint -
Clean thoroughly around engine -
Clean thoroughly around transmission -
Clean all belts, pulleys, etc. 45
Lubricate belt tensioner (nipple) 49
Lubricate triangle link (nipple) 48
Lubricate the drivers seat 48
Lubricate all wires 45
Lubricate safety lock on cutting unit 48
Lubricate inner stud on cutting unit 48
Lubricate slot for cutting unit tool frame 48
Lubricate bearing surfaces on cutting unit 48
Clean inside frame tunnel -
Lubricate pedal mechanism inside frame
tunnel 45
Lubricate the gear lever 47
Lubricate the parking brake wire 49