28 Net finity 3500 -M20 – T ype 8657 Mod els 21 Y, 2 2Y, 31Y, 32Y ,
UNIX messages
This section provides descriptions of the Ethernet error mes-
sages for the SCO UNIX LL I driver, and suggest ed actions
to resolve each problem.
PermaNet
Server : Switching back to Primary Adapter.
Explanation: The primary Ethernet
connection is now operating correctly.
Network traffic will automatically transfer
to the primary Ethernet controller.
Action: None needed, message is for
information only.
Table 5. UNI X LLI driver messages for the Et hernet
controller
pnt0-2 PCI search specified, PCI device not found!
Explanation: The driver cannot locate the
Ether net controller on the P CI bus.
Action:
• Run the NETCONFIG program to search
for another Ethernet controller
• Verify that the Ethernet contro ller is
enabled. If the Ethernet controller is
enabled, run the diagnostic programs.
pnt0-6 Cannot allocate memory for the adapter
during an interrupt. Please check the
Streams parameters.
Explanation: On a SunSoft Solaris system,
th is messa ge indi cate s that the syst em is out of
Streams memory blocks.
Action: Use the CRASH utility to increase the
num ber of Streams memor y bloc ks. Modify the
interrupt request (IRQ) settings in the
Configuration/Setup Utility program, or run the
NETCONFIG program to match the hardware
settings.
pnt0-7 Cannot allocate memory for the adapter
during reset . Please check the Streams
parameters.
Explanation: The system is out of Streams
m emory bl ocks.
Action: Use the CRASH utility to increase the
number of Streams memory blocks.