Installing options 49
11. Connect any needed cables to the adapter.
Attention: Route cables so that they do not block the
flow of air from the fans.
The following illus tration shows the reroutin g of the
SCSI cable. If you install a ServeRAID a dapter and
intend to use it with internal drives, remove the cable
from SCSI connector on the system board and connect
it to the RAID adapter.
Þ1Ý SCSI connector
12. If you have ot her options to in stall o r re move, do so
now; otherwise, go to “Installing the side cover” on
page 60.

Installing internal drives

If you add differ ent types of dri v es, the syste m can re ad mul-
tiple types of media and store more data. Several types of
drives are available, such as:
• Diskette (i nstalled)
• Hard disk (installed on some models)
• CD-ROM (installed)
•Tape

Internal drive bays

Internal drives are installed in

bays

. The bays of the Netfin-
ity 3500- M20 are in the front of the server, as shown in the
following illustration.
M20
Netfinity 3500