FRU information (service only) 127
6. Remove all cables.
7. Remove s crews and lift power supply out of the server.

Pl an ar wit h heats i nk s

Before you begin:
• Read “Saf ety inf ormation” on page 155.
• Review the in for m ation in “Before you begi n” on pa ge
43.
Note: This illustration depicts the serv er in the upright posi-
tion. It is recom m ended t hat the server be place d on
its left side before performing this service procedure.
Þ1Ý Screws
Þ2Ý Planar
To remove the planar with heatsinks, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the left-s ide cover (see “Removing the side
cover” on page 4 4.
4. Turn the ser ver onto it s right side so that the open left
side is facing up.
Note: Rotate the feet in toward the server so they do
not detach due to the weight of the server.
5. Remove the support bracke t (see “R emoving the sup-
port bracket” on page 45) and air baffle.