Netfinity Manager 91
Note: Use PUBLIC or authorize only a specific ID
or group name. Netfinity Manager update
programs use the DB 2SQLC0 pa ckage
and do not require specific table privileges.
To revoke privileges, substitute REVOKE for GRANT in
the command line.
To configure Netfinity Manager to discontinue export
data through ODBC for use on DB2, refer to “ODBC
database support” on page 93.
Catalogi ng the da tabase in the mana ging
system :
If th e manager is using a remote database, cata-
log the node the database resides on and then catalog the
database to that node.
Once this st ep has been completed , the name of the N etfin-
ity Manager data base will appear in the Syste m Information
Tools Database Selection window.
Deleting the database
The follow ing information describes how to delete the dat a-
base for all supported operating systems.
Note: If your operating system is OS/2, refer to “Deleting
the database on OS/2”.
1. St ar t a DB2 co m ma nd wi nd ow.
2. Type
DB2 DROP DATABASE databasename
where
databasename
is the n ame of the database as
specified during the database installation.
3. Press Enter.
Deleti ng the dat abase on OS/2:
1 .Insert the
Netfinity
Manager CD-ROM
into the database server CD-ROM
drive (in this example, the CD-ROM drive is E).
2. St art an OS/2 wi nd ow or ful l- s c ree n sess io n.
3. Mak e the CD-ROM drive the active drive.
Type E: and press Ent er.
4. Type the following command at the OS/2 prompt:
NETFINDB DELETE /DBNAME=databasename
where
databasename
is the name of the dat abase as
specified during NETFINDB execution.
5. Press Enter.
To configure Netfinity Manager to discontinue export data
throu g h ODBC for us e on DB2, refer to “ODBC database
suppor t” on page 93.
Lotus Notes database support
To enable the Netfinity Manager to export system data to a
Lotus Note s database, the following must be done:
1. Install the Netfinity Manager database template on the
Lotus Notes se rver.
2. Enable Netfinity Manager to export to the Lotus Notes
server.