IBM 2283, 6274 manual Inserting and removing a disc

Inserting and removing a disc

To insert a disc:

1.Press the device bay release button to lower the device bay. See “Accessing the optical drive” on page 17.

2.With the computer turned on, press the eject button.

3.Place the disc in the tray with the label facing up 1.

4.Close the tray by gently pushing the tray closed. When the tray is closed, the indicator light on the front of the drive will activate to indicate that the drive is in use.

To remove a disc:

1.Press the device bay release button to lower the device bay. See “Accessing the optical drive” on page 17.

2.With the computer turned on, press the eject button. When the tray slides out, carefully remove the disk.

3.Close the tray by gently pushing the tray closed.

Note: If the tray does not slide out when you press the eject button, insert the end of an opened paper clip into the emergency-eject hole located at the front of the optical drive.

Chapter 3. Operating and caring for your computer 19