IBM 6274, 2283 manual Audio problems, Symptom, Action, Select Accessories, d. Select Multimedia

Audio problems

Symptom			Action
No audio in Windows	1.	Check the Windows Volume Control program to ensure
		the volume settings are not set too low or that the mute
		setting is not enabled. To access the Windows Volume
		Control program, do the following:
		a. From the Windows desktop, click Start.
		b.	Select Programs.
		c.	Select Accessories.
		d. Select Multimedia.
		e. Click Volume Control.
	2.	Make sure the program you are using is designed for use
		in Windows. If the program is designed to run in DOS, it
		does not use Windows sound features and must be
		configured to use Sound Blaster Pro or Sound Blaster
		emulation.
	If these actions do not correct the problem, run the diagnostic
	programs (see “Running the IBM Enhanced Diagnostics
	program” on page 66). If you need technical assistance, see
	Chapter 7, “Getting information, help, and service,” on page
	69.
No audio when you play	1.	Make sure the game or program is configured to use
DOS games or use DOS		Sound Blaster Pro or Sound Blaster emulation. Refer to
programs		the documentation that came with your DOS program
		for instructions on selecting sound adapter settings.
	2. Shut down and restart your computer in MS-DOS mode.
		Then try to run the program again.
	If these actions do not correct the problem, run the diagnostic
	programs (see “Running the IBM Enhanced Diagnostics
	program” on page 66). If you need technical assistance, see
	Chapter 7, “Getting information, help, and service,” on page
	69.

50User Guide