IBM 2283, 6274 manual Code, Description, Action

Code	Description		Action
662	Diskette drive configuration error	1.	Go to “Starting and using the IBM
			Setup Utility program” on page 27,
			and follow the instructions to verify
			the diskette drive configuration.
		2.	Run the diagnostic program for the
			diskette drive. See “Running the
			IBM Enhanced Diagnostics
			program” on page 66.
		3.	If the problem persists, have the
			computer serviced.
1762	Hard disk configuration error	1.	Go to “Starting and using the IBM
			Setup Utility program” on page 27,
			and follow the instructions to verify
			the hard disk configuration.
		2.	If the problem persists, have the
			computer serviced.
178x	Hard disk or IDE device failed	1.	Go to “Running the IBM Enhanced
			Diagnostics program” on page 66,
			and follow the instructions for
			running the diagnostic program for
			the hard disk drive and IDE
			devices.
		2.	If the problem persists, have the
			computer serviced.
18xx	A PCI adapter has requested an	Go to “Starting and using the IBM
	unavailable resource	Setup Utility program” on page 27 and
		follow the instructions to reconfigure
		the PCI devices.
1962	No startup device found	1.	Go to “Starting and using the IBM
			Setup Utility program” on page 27
			and follow the instructions to verify
			that the startup sequence is
			configured properly.
		2.	If the problem persists, have the
			computer serviced.
2400	Display adapter failed; using	Have the computer serviced.
	alternate
2462	Video configuration error	Have the computer serviced.
5962	IDE CD-ROM configuration error	Have the computer serviced.
8601	Pointing device error	Have the computer serviced.
8603	Pointing device has been removed	1.	Make sure that the pointing device
			is properly attached.
		2.	If the problem persists, have the
			computer serviced.

Chapter 6. Troubleshooting 47