IBM 6274, 2283 manual Symptom, Action, User Guide

Symptom		Action
When you try to use the	1. If you added, changed, or reinstalled a modem, make
modem, it does not work.	sure it is installed correctly.
	2. Make sure your communications program is configured
	correctly. The following settings are generally
	compatible:
	•	Modem settings:
		— Generic Hayes-type modem
		— Hayes-compatible error correcting
		— Hayes-compatible high speed
		— User-defined modem
		— Hayes modem
		— Other
		If you select a modem type of Other, you must
		include the proper modem initialization string. For
		most programs, the initialization string
		AT&F
		will work.
	• Baud rate: 115200 Kbps or the maximum setting
		offered by your communications software
	•	COM port: COM1
		For help with configuring your communications
		program, refer to the documentation that comes
		with your communications program.

If these actions do not correct the problem, run the diagnostic programs (see “Running the IBM Enhanced Diagnostics program” on page 66). If you need technical assistance, see Chapter 7, “Getting information, help, and service,” on page 69.

62User Guide