IBM 2283, 6274 manual Creating an IBM Enhanced Diagnostics diskette, Select Downloadable files

The IBM Enhanced Diagnostics are available on:

•The Product Recovery program on the hard disk

•The World Wide Web

Important

To determine if your computer has the Product Recovery program on the hard disk, look for the following prompt when you start your computer:

To start the IBM Product Recovery Program, press F11

If this prompt is displayed at startup, the Product Recovery program is installed.

If your computer does not have the Product Recovery program installed, and you do not have a Product Recovery CD(s) for your operating system, contact the IBM HelpCenter for more information about obtaining a Product Recovery CD.

You can create an IBM Enhanced Diagnostics diskette or you can run the diagnostics directly from the product recovery program.

Creating an IBM Enhanced Diagnostics diskette

To download the IBM Enhanced Diagnostics diskette image from the World Wide Web, do the following:

1.Go to http://www.ibm.com/pc/support on the World Wide Web.

2.Type your machine type and model, and click Go.

3.Select Downloadable files.

4.Download the .EXE file to a hard disk directory (not to a diskette).

5.Go to a DOS prompt and change to the directory where the file was downloaded.

6.Insert a blank high-capacity diskette into the diskette drive A.

7.Type the following and press Enter: filename a:

where filename is the name of the file you downloaded from the Web.

The self-extracting downloaded file is copied to the diskette, and a startable IBM Enhanced Diagnostics diskette is created.

Chapter 6. Troubleshooting 65