IBM 6274, 2283 manual Viewing and changing settings

Viewing and changing settings

The IBM Setup Utility menu displayed by your computer might look slightly different from the menu shown here, but it will operate the same way.

IBM Setup Utility

__________________________________________________________________

Main Devices Startup Advanced Security Power Exit

__________________________________________________________________

> System Summary

Product Data:
Machine Type / Model	XXXX / XXXX
Flash EEPROM Revision Level	22KT05AUS
Boot Block Revision Level	2205A
System Board Identifier	XXXXXXXXX
System Serial Number	XXXXXXXXX
BIOS Date (MM/DD/YY)	XX/XX/XX
> System UUID
System Time (HH:MM:SS):	[XX:XX:XX]
System Date (MM/DD/YYYY):	[XX/XX/XXXX]
Language:	[English (US]

__________________________________________________________________

F1: Help	↑↓	: Up/Down	-/+: Select Values	F9: Setup Defaults
Esc: Exit	←→	: Left/Right	Enter: Select	F10: Save & Exit

The program menu lists items that identify system configuration topics. You might see symbols next to configuration menu items. The following table explains these symbols.

•An additional submenu or screen is available

°A change to that item has been made in the system configuration, or the program has detected an error and attempted to correct it. Also, an additional menu might follow a menu item with a ° beside it.

∗A system resource conflict was detected. Resolve this conflict before exiting from the program so that your computer will function properly.

[ ] In the program menus, the information you can change is enclosed in brackets like these. You cannot change information that is not enclosed in brackets.

28User Guide