From the Launchpad window, click Installation wizard to start the installation.
Note: The LaunchPad window remains open (behind the wizard) during the installation and returns to the foreground when the installation is complete. You can click Exit to close the LaunchPad.
1.There might be a slight delay while the software loads on your system. After the software loads a DOS prompt window opens to display the following message:
Initializing InstallShield Wizard... Preparing Java (tm) Virtual Machine……………..
2.The Welcome window is displayed. Make a note of the recommended documents to read prior to installation. Click Next to continue, or click Cancel to exit the installation.
3.Read and accept the License Agreement, and then click Next.
4.If the installation wizard detects a prior installation of the CIM agent, the Product Installation Check window opens. Check the Preserve Configuration check box if you want to preserve your configuration settings. Follow any specific instructions in the window. For example, the figure below shows a warning to stop running services. Once you have followed all instructions, select Next.
Figure 2: Product Installation Check window
Exchange 2003 VSS Backup Solution | Page 14 | David West, David Hartman |
For IBM Storage DS8000/DS6000 |
| ©Copyright IBM Corp. 2007 |
And Symantec Backup Exec 11d |
|
|
