where:
•9.11.111.111 represents the IP address of the Enterprise Storage Server.
•essuser represents the DS Storage Manager user name.
•esspass represents the DS Storage Manager password for the user name.
The following is an example of a successful response:
Thu Oct 09 11:22:28 PDT 2003 IBM ESSCLI 2.4.0.236
Server Mode Mfg WWN CodeEC Cache NVS Racks
2105.22232 800 013 5005076300C09470 2.4.0.236 8GB 2GB
c.Verify that the CLI.CFG file is set correctly. From the command prompt window, issue the following command:
rsTestConnection.exe /s /v primaryservername
where
•/s primaryservername represents the IP address or the complete host name of an ESS Copy Services server.
•/v designates that all responses from the server be displayed.
Note: In some cases the ESS CLI does not work correctly unless the system has been rebooted following the new installation of the
ESS CLI.
3.Using the Windows Services Facility, verify that the SLP is active by selecting Start Æ Settings Æ Control Panel.
a.Find the Service Location Protocol (SLP) in the Name column. For this component, the Status column should be marked Started and the Startup Type column should be marked Manual. If either of those conditions are not met, right click on Service Location Protocol and click Start from the
b.Do not close the Services window, because you will use it in the next step to verify that the CIMOM is started.
Exchange 2003 VSS Backup Solution | Page 26 | David West, David Hartman |
For IBM Storage DS8000/DS6000 |
| ©Copyright IBM Corp. 2007 |
And Symantec Backup Exec 11d |
|
|
