Error Type 2. CIM agent not correctly configured If any of the following are true:
•You have never used the setdevice tool to define a storage unit to the
CIMOM.
•You made an error in the IP address, user name, or password.
•You did not restart the CIMOM after adding the ESS/DS.
The following message series is displayed near the end of the output messages:
Connecting to CIM agent, host=1.11.111.111, port=5989
Found 0 IBMTSESS_StorageSystem instances
CIM agent not correctly configured
You can find more information about the possible cause of this error message by examining the cimomx.log (where x can be a number from
If you have a network connection problem or you have set an incorrect IP address for the ESS using the setdevice tool, the ESS CLI cannot connect to the ESS. A message pair similar to the following can appear in the log:
If you have entered an incorrect user name or password for the ESS using the setdevice tool, the ESS CLI can connect to the ESS but cannot authenticate. A message pair similar to the following can appear in the log:
Exchange 2003 VSS Backup Solution | Page 29 | David West, David Hartman |
For IBM Storage DS8000/DS6000 |
| ©Copyright IBM Corp. 2007 |
And Symantec Backup Exec 11d |
|
|