IBM N2800e - page 50

Table8. NSBxxxx error codes and text messages (continued)

Error code Error message What you should do

NSB83539 Cannot PING boot server

x%s. Verifyyour configuration settings in the NS

Boot utility,and confirm the server

configuration.

NSB83549 Unable to open file. Confirm the server configuration.

NSB83560 Boot file name or

directory not valid. Verifyyour configuration settings in the NS

Boot utility,and confirm the server

configuration.

NSB83579 Failed to boot after 1

attempt. Verifyyour configuration settings in the NS

Boot utility,and confirm the server

configuration.

NSB83589 Failed to boot after %d

attempts. Verifyyour configuration settings in the NS

Boot utility,and confirm the server

configuration.

NSB83590 Unrecognized boot file

server protocol. Verifyyour configuration settings in the NS

Boot utility.

NSB83600 Boot file server protocol

not specified. Verifyyour network configuration settings

in the NS Boot utility.

NSB83619 Address resolution failed,

boot file server x%s. Verifyyour configuration settings in the NS

Boot utility,and confirm the server

configuration.

Gateway messages (NSB84xxx)

NSB84509 Gateway address not

valid. Verifyyour network configuration settings

in the NS Boot utility.

NSB84519 Address resolution failed,

gateway x%s. Verifyyour network configuration settings

in the NS Boot utility.

Client IP address messages (NSB85xxx)

NSB85509 Duplicate IP address x

%s, that is owned by %s. Verify your network configuration settings

in the NS Boot utility,and the DHCP or

BOOTP server configuration settings.

NSB85519 IBM Network Station IP

address not valid. Verifyyour network configuration settings

in the NS Boot utility.

Subnet mask messages (NSB86xxx)

NSB86509 Subnet mask not valid. Verifyyour network configuration settings

in the NS Boot utility.

IP address messages (NSB87xxx)

NSB87509 Address resolution failed,

IP address x%s. Verifyyour network configuration settings

in the NS Boot utility.

NSB87519 Address resolution failed.

IP address x%s not valid. Verify your network configuration settings

in the NS Boot utility.

NSB87529 IP address %s not in ARP

cache. Verifyyour network configuration settings

in the NS Boot utility.

Remote packet messages (NSB88xxx)

NSB88500 Stopping DLL packet

replication. Reload the factory default settings on the

thin client, and then configure the network

settings in the NS Boot utility.

40

Contents

Main Page Page Page Contents Page Safety notices Danger notices Caution notices Handling static-sensitive devices vi About this book Who should read this book Information available on the World Wide Web Related information How to send your comments viii Understanding your NetVista Thin Client Express Page Learning about the hardware Standard hardware Hardware connectors Communication hardware Monitor specifications Power consumption Upgrading hardware features Page Page Setting up the hardware Page Startup sequence Page Configuring the N2800e Thin Client Express Using the Setup Utility to configure the workstation Using the Configuration Tool to configure the workstation Page Page Installing the Thin Client Service Utility and the Operations Utilities Installing the utilities from the NetVista Thin Client Utilities CD Downloading the utilities from the NetVista Thin Client web site Page Page Managing your Thin Client Express remotely Page PPP dialer for Thin Client Express workstations Prerequisites for using PPP dial access Configuring a workstation for PPP dialer Preparing the workstation for PPP dialer configuration Configuring initial modem settings for PPP dialer access Starting the PPP dialer Learning about the NC dialer window Maintaining and reconfiguring PPP dialer parameters Using the PPP dialer to access flash images Troubleshooting PPP dialer problems Altering the flash image of a workstation Performing a software update on a workstation Using the Configuration Tool to perform a software update on a workstation Using the Thin Client Manager Operations Utility to perform a software update on a workstation Recovering the flash image of a workstation Using one workstation to recover the flash image of another workstation Enabling peer flash recovery on a workstation Recovering the image on the peer-booted workstation Disabling peer flash recovery on a workstation Using the Setup Utility to recover the flash image of a workstation Using the Thin Client Manager Operations Utility to recover the flash image of a workstation Resolving hardware problems Verifying hardware problems Visible hardware failure Page Audio beep sequences LED indications Error codes and text messages Page Page Page Page Appendix A. Replacing hardware parts Replacing the N2800e Thin Client Express CompactFlash card Replacing parts other than the N2800e CompactFlash card Page Returning hardware parts Appendix B. Hardware maintenance procedures Page Page Page Page Page Appendix C. Setting the thin client voltage for your location Page Appendix D. Recovering the boot block image Page Appendix E. Choosing a flash file Page Appendix F. Monitor specifications Page Appendix G. Connector pin information The following tables define the connector pins that are used with the N2800e thin client. Page Notices Environmental Design Product Recycling and Disposal Trademarks Electronic Emission Notices Federal Communications Commission (FCC) Statement Page Page O P R S T Index A B C D F O P R S T Readers Comments Wed Like to Hear from You ReadersComments Wed Like to Hear from You ___________________________________________________________________________________________________ SA23-2808-00