IBM REDP-4372-00 manual Installing the POS plug-in from the command line

4372ch05.fm Draft Document for Review November 15, 2007 3:27 pm

Restart the Rembo Server service (GUI)

Restart the server by right clicking Rembo Server in the Services dialog again if necessary (as in, “Stop the Rembo server service (GUI)” on page 98) and selecting Start.

5.2.3 Installing the POS plug-in from the command line

We performed the steps below using the windows command prompt to install the POS plug-in on BERLIN.

Stop the Rembo server service (CMD)

To stop the service, first login to the server as an administrator and then perform the following steps as shown in Figure 5-3.

1.Open a windows command prompt by clicking: Start → Run

then typing:

cmd

and pressing Enter.

2.At the command prompt enter: net stop "Rembo Server

Figure 5-3 Stopping the Rembo Server service from the command line

Copy the POS plug-in module to the packages directory (CMD)

To copy the POS plug-in module into the Tivoli Provisioning Manager for OS Deployment executable directory perform the following steps from the command prompt as shown in Figure 5-4 on page 101.

1.At the command prompt type: cd <package folder path>

and press Enter.

2. Copy the plug-in package file by typing:

100Tivoli Provisioning Manager for OS Deployment in a Retail Environment