Icom IC-R20 instruction manual Release Mode Scan to start scan

■Memory channel programming

qSet the desired frequency and other functions in VFO mode.

wPush [MR S.MW] for 1 sec. to enter the select memory write condition.

•1 short and 1 long beeps sound.

e Rotate [R-DIAL]to select the de- sired memory channel number.

r Push [MR S.MW] for 1 sec. again to program the contents into the selected channel.

•3 beeps sound.

■Scan skip setting

qPush [MR S.MW] to select memory mode.

wRotate [R-DIAL]to select the de- sired memory channel.

eWhile pushing [5 SKIP], rotate [R-DIAL]to set the skip setting (skip channel or skip frequen- cy) ON and OFF.

■VFO scans

qPush [VFO MHz] to select VFO mode.

wWhile pushing [MODE SCAN], rotate [R-DIAL]to select the de- sired scan type.

•Selectable from “ALL,” “BAND” or “PROG xx” (xx= 0–24).

√

SCAN:ALL

√

SCAN:BAND

√

SCAN:PROG-01

eRelease [MODE SCAN] to start scan.

•Rotate [R-DIAL]to change the scan- ning direction.

•During scan, push [MR S.MW] to start auto memory write scan.

rPush [DUALWATCH] to stop scan.

■Memory scans

qPush [MR S.MW] to select

memory mode.

•Push [BAND] to select a bank, if de- sired.

wWhile pushing [MODE SCAN], rotate [R-DIAL]to select the de- sired scan type.

•Selectable from “ALL,” “BANK-LINK” or “BANK.”

SCAN:ALL

SCAN:BANK-LINK

SCAN:BANK

eRelease [MODE SCAN] to start

memory/bank scan.

•Rotate [R-DIAL]to change the scan- ning direction.

rPush [DUALWATCH] to stop scan.