Icom IC-R20 Programming memory/bank name, Rotate R-DIALto select the desired character

6 MEMORY CHANNELS

■Programming memory/bank name

Each memory channel can be programmed with an alphanu- meric channel name for easy recognition and can be indicated independently by channel. Names can be a maximum of 8 characters.

qPush [MR S.MW] to select memory mode.

wRotate [R-DIAL]to select the desired memory channel. ePush [MR S.MW] for 1 sec. to select the select memory

write condition.

•1 short and 1 long beep sound.

•“µ ” indicator blinks.

FM

145.700 012

. µ >BANK-:C-11

rWhile pushing [8 SET], rotate [R-DIAL]to select “BNAME” or “MNAME” when programming the memory name or the bank name, respectively.

•The item can also be selected by pushing [8 SET] several times.

•After selecting the memory or bank name programming condi- tion, a cursor blinks for the first digit.

Bank name selection	Memory name selection
FM	FM
145..700µ 012	145..700µ 012
-BANK-:C-11	-BANK-:C-11
>BNAME:	>BNAME:
-MNAME:	>MNAME:

tRotate [R-DIAL]to select the desired character.

•The selected character blinks.

•While pushing [6 M.N], rotate [R-DIAL]to select the character group.

yWhile pushing [BAND], rotate [R-DIAL]to move the cur- sor to left or right.

•Push [BAND] to move the cursor to right.

Bank name	Memory name
FM	FM
145..700µ 012	145..700µ 012
-BANK-:C-11	-BANK-:C-11
>BNAME:GRO	>BNAME:
-MNAME:	>MNAME:Ric

uRepeat steps t and y until the desired 8-character chan- nel names are displayed.

iPush [MR S.MW] for 1 sec. to program the name and exit the channel name programming condition.

•3 beeps sound.

NOTE: Only one bank name can be programmed into

each bank. Therefore, the previously programmed bank

name will be displayed when bank name indication is se-

lected. Also, the programmed bank name is assigned for the other bank channels automatically.

29