DCP-18A/E fuse replacement

If the fuse blows or the receiver stops functioning while oper- ating with the optional CP-18A/E, find the source of the prob- lem if possible, and replace the damaged fuse with a new rated one (FGB 5 A) as shown below.

Fuse 5 A

Recommendation:

Charge the supplied battery pack for a maximum of 8 hours. Li-Ion batteries are different from Ni-Cd bat- teries in that it is not necessary to completely charge and discharge them to prolong the battery life. There- fore, charging the battery in intervals, and not for ex- tended periods is recommended.

BATTERY INSTALLATION/CHARGING 2

DRapid charging with the BC-156

The optional BC-156 provides rapid charging of battery pack

(BP-206).2

Charging periods: 2.5 hours (w/BP-206)

Shorten or remove the antenna.

Turn power OFF.

AC adaptor

Check the

(supplied with BC-156)

orientation.

BC-156

CAUTION: Shorten or remove the telescoping antenna be- fore charging to prevent the receiver from overturning.

If the charge indicator flashes orange, there may be a

problem with the battery pack (or charger). Reinsert the battery pack or contact your dealer.

10

Page 23
Image 23
Icom IC-R20 instruction manual CP-18A/E fuse replacement, Rapid charging with the BC-156