Icom IC-R20 instruction manual Erasing/transferring bank contents

6 MEMORY CHANNELS

■Erasing/transferring bank contents

The bank contents of programmed memory channels can be	ePush [8 SET] once to select “BANK.”
cleared or reassigned to another memory bank.	• While pushing [8 SET] then rotate [R-DIAL]also selectable
	“BANK.”

INFORMATION: Even if the memory bank contents are

cleared, the memory channel contents still remain pro- grammed.

qSelect the desired bank contents to be transferred or erased from the bank.

➥Push [MR S.MW] to select memory mode.

➥While pushing [BAND], rotate [R-DIAL]to select the desired memory bank group.

➥Rotate [R-DIAL]to select the bank channel.

wPush [MR S.MW] for 1 sec. to enter the select memory write condition.

•1 short and 1 long beeps sound.

•Displays the original memory channel number automatically and “µ ” indicator blinks.

•Do not hold [MR S.MW] for more than 2 sec., otherwise the memory contents will be copied to VFO.

			Push	MR	for 1 sec.
				S.MW
	-DUP TSQL		AFC		FM
MODE		FM ANL			145..700µ 642
145 700
					-BANK-:A-93
B:GROUP1			PSKIP		-BNAME:OSAKA
√		µ	A93		-MNAME:
					-SKIP-:OFF
ATT
					>CLEAR

rWhile pushing [BAND], rotate [R-DIAL]to select the de- sired bank group to be transfer.

•Select “– – – –” indication when erasing the contents from the bank.

When transferring	When erasing
FM	FM
145..700µ 028	145..700µ 028
>BANK-:R-00	>BANK-:----
-BNAME:	-BNAME:
-MNAME:	-MNAME:
-SKIP-:OFF	-SKIP-:OFF
>CLEAR	>CLEAR

tRotate [R-DIAL]to select the desired bank channel. yPush [MR S.MW] for 1 sec.

33