Icom IC-R20 Memory bank setting, Push MR S.MW for 1 sec. to set the channel into the bank

6 MEMORY CHANNELS

■Memory bank setting

The IC-R20 has a total of 26 banks (A to Z). Regular memory channels, 000 to 999, are assigned into the desired bank for easy memory management.

qPush [MR S.MW] for 1 sec. to select the select memory write condition.

•1 short and 1 long beep sound.

•“µ ” indicator blinks.

wRotate [R-DIAL]to select the desired memory channel. eWhile pushing [8 SET], rotate [R-DIAL]to select “BANK.”

•“BANK” item can also be selected by pushing [8 SET] several times.

•Bank group and channel number is displayed if the selected mem- ory channel has already been previously assigned into a bank.

	FM
[R-DIAL]	146..010µ 012
	-BANK-:----
	-BNAME:
	-MNAME:
	-SKIP-:OFF
	>CLEAR

BAND	SET
After	8	is pushed
MR
S.MW
FM

SET	146.010µ	012
	.
8	>BANK-:----

rWhile pushing [BAND], rotate [R-DIAL]to select the de- sired bank group from “A” to “Z.”

•The bank group can also be selected by pushing [BAND] sev- eral times.

FM

146.010 012

. µ

>BANK-:A-00 -BNAME:

Bank group is selected with BAND

tAfter releasing [BAND], rotate [R-DIAL]to select the bank channel number from “00” to “99.”

•Vacant bank channel numbers will only be displayed.

FM

146.010 012

. µ

>BANK-:A-00 -BNAME:

Bank channel is selected with [R-DIAL]

yPush [MR S.MW] for 1 sec. to set the channel into the bank.

•Return to the previous indication.

27