Icom IC-R20 instruction manual CI-V address, CI-V baud rate, CI-V transceive

10 SET MODE

DCI-V address

To distinguish equipment, each CI-V transceiver/receiver has its own Icom standard address in hexadecimal code. The IC- R20’s address is “6C.”

When 2 or more IC-R20s are connected to an optional CT-17 CI-V LEVEL CONVERTOR, set a different address for each IC-

R20 in the range “01” to “7F.”	(default: 6C)
CI-V-ADDRESS	CI-V-ADDRESS
----------------	----------------
-6C	-01
CI-V address set to 6C	CI-V address set to 01

DCI-V baud rate

Sets the data transfer rate. When “AUTO” is selected, baud rate is automatically set according to the connected controller

or other Icom CI-V radio.	(default: AUTO)
CI-V-BAUD-RATE	CI-V-BAUD-RATE
----------------	----------------
-300bps	-300bps
-1200bps	-1200bps
-4800bps	-4800bps
-9600bps	>9600bps
-19200bps	-19200bps
>AUTO	-AUTO
“AUTO” baud rate setting	9600 bps setting

DCI-V transceive

CI-V transceive operation is possible with the IC-R20 con- nected to an Icom CI-V radio. When “ON” is selected, chang- ing the frequency, operating mode, etc. on the IC-R20 automatically changes those of connected radios and vice

versa.	(default: ON)
CI-V-TRANSCEIVE	CI-V-TRANSCEIVE
----------------	----------------
>OFF	-OFF
-ON	>ON
CI-V transceive OFF	CI-V transceive ON

59