Icom IC-R20 ULEFT Dial L-DIAL, IRIGHT Dial R-DIAL, QDUALWATCH/CLEAR KEY Dualwatch, RBAND KEY Band

uLEFT DIAL [L-DIAL]

➥ During single band operation, rotate to adjust audio vol-

ume level.* (p. 17)

➥ During dualwatch operation, activates as the tuning dial

for upper side on the display.*

iRIGHT DIAL [R-DIAL]

➥ Rotate to select the operating frequency.* (p. 12)

➥ While scanning, changes the scanning direction.*

(p. 26)

➥ While pushing [SQL], sets the squelch level.* (p. 18)

➥ While pushing [VFO MHz], sets the operating frequency

PANEL DESCRIPTION	1
qDUALWATCH/CLEAR KEY [DUALWATCH]	1

DUALWATCH	➥ Push for 1 sec. to toggle between single band
	and dualwatch operation. (p. 24)

➥Clears numeric key input. (p. 15)

➥Returns to previous operating condition while setting frequency or memory channel, or while in set mode.

➥Cancels the band scope or scan function, etc. (pgs. 22, 35)

wMAIN/SUB KEY [MAIN/SUB] (p. 24)

in 1 MHz or 10 MHz in VFO mode.* (p. 14)

➥ While pushing [BAND], selects the operating band in

VFO mode.* (p. 14)

➥ While dualwatch operation, activates as the tuning dial

for lower side on the display.* (p. 14)

MAIN/SUB

➥ During dualwatch operation, push to select the MAIN band or SUB band.

➥During dualwatch operation, push for 1 sec. to exchange the upper frequency and lower fre- quency.

KEYPAD

DUALWATCH	MAIN/SUB		POWER
BAND	VFO	MODE	MR
	MHz	SCAN	S.MW
DIAL.SEL	SWEEP	CENTER
1	2	3	SCOPE
T-SCAN	SKIP	M.N
4	5	6	0 AFC
TONE	SET	TS
7	8	9	LOCK
ATT	RF GAIN	IC Recorder
			REC

ePOWER KEY [POWER]

Push for 1 sec. to turn the receiver power ON

POWER

and OFF.

rBAND KEY [BAND]

Push to select the operating frequency band.

BAND

(p. 12)

*The function of tuning control and volume control can be traded. See page 23 for details.

2