Icom IC-R20 Programmed scan operation, Programming scan edges Writing a memory channel

QUICK REFERENCE GUIDE

■Programmed scan operation

25 pairs, 50 channels of memories are used for programmed scan operation, that specify a scanning range. The pro- grammed scan scans between “xxA” and “xxB” (xx=00 to 24) frequencies. Therefore, before operating the programmed scan, different frequencies must be programmed into “A” and “B” channels.

DProgramming scan edges

3. Writing a memory channel
Push [MR S.MW] for 1 sec. until
3 beeps sound.	DUALWATCH	MAIN/SUB		POWER
• Scan edge channel “B” is automat-		MHz	SCAN	S.MW	S.MW
	BAND	VFO	MODE	MR	MR
ically selected when continuing to	1	2	3	SCOPE
push [MR S.MW] after program-	4	5	6	0 AFC
ming.	7	8	9	LOCK
• After programming is completed,				REC	Front
return to VFO indication.

A start frequency must be programmed into a “xxA,” and end frequency must be programmed into a “xxB” memory channel.

1. Setting frequency

In VFO mode, set the desired receive frequency mode.

•When “µ ” indicator is displayed, push [VFO MHz] to select the VFO mode.

4.Selecting a scan edge channel “B”

Push [MR S.MW] for 1 sec., then ro- tate [R-DIAL]to select one of the desired scan edge channel “B.”

• “µ ” indicator blinks.

• When the scan edge channel “B” is al-

ready selected at step 3. (continuing to

			Top
DUALWATCH	MAIN/SUB		POWER
BAND	VFO	MODE	MR	MR
	MHz	SCAN	S.MW	S.MW
1	2	3	SCOPE
4	5	6	0 AFC

2.Selecting a scan edge channel “A”

Push [MR S.MW] for 1 sec., then

Top

DUALWATCH MAIN/SUBPOWER

push [MR S.MW] after programming),

skip this step.

FM

7 8 9 LOCK

REC

Front

rotate [R-DIAL]to select one of the desired scan edge channel “A.”

• “µ ” indicator blinks.

FM

146.010 03A

. µ

-BANK-:----

-BNAME:

BAND	VFO	MODE	MR	MR
	MHz	SCAN	S.MW	S.MW
1	2	3	SCOPE
4	5	6	0 AFC
7	8	9	LOCK

REC

Front

146.010 03B

. µ

-BANK-:----

-BNAME:

5. Writing a memory channel

Push [MR S.MW] for 1 sec. until 3 beeps sound.

•The next scan edge channel “A” is automatically selected when con- tinuing to push [MR S.MW] after programming.

•After programming is completed, return to VFO indication.

VII