Icom IC-R20 instruction manual Copying memory contents

6 MEMORY CHANNELS

■Copying memory contents

This function transfers a memory channel’s contents to VFO (or another memory channel). This is useful when searching for signals around a memory channel frequency and for re- calling the offset frequency, subaudible tone frequency etc.

Pushing [MR S.MW] for 2 sec. at the step w, will also

copy the memory contents to VFO. In this case, the steps e and r are not necessary.

DMemory➪VFO

qSelect the memory channel to be copied.

➥Push [MR S.MW] to select memory mode, then rotate [R-DIAL]to select the desired memory channel.

• Select the bank channel with [BAND] and [R-DIAL], if desired.

wPush [MR S.MW] for 1 sec. to select the select memory write condition.

•1 short and 1 long beep sound.

•“µ ” indicator blinks.

ePush [VFO MHz] to select “VFO.”

•Rotate [R-DIAL]can also select “VFO.”

rPush [MR S.MW] for 1 sec. to write the selected channel contents to VFO mode.

•Returns to VFO mode automatically.

DMemory➪memory

qSelect the memory channel to be copied.

➥Push [MR S.MW] to select memory mode, then rotate [R- DIAL] to select the desired memory channel.

wPush [MR S.MW] for 1 sec. to select the select memory write condition.

•1 short and 1 long beep sound.

•“µ ” indicator blinks.

•Do not hold [MR S.MW] for more than 1 sec. otherwise the memory contents will be copied to VFO.

eRotate [R-DIAL]to select the target memory channel. rPush [MR S.MW] for 1 sec. again to copy.

[EXAMPLE]: Copying channel 20 to 51.

Select memory	MR	Push	MR
channel	S.MW		S.MW
	-DUP TSQL	AFC
MODE FM ANL
	145 870
		PSKIP
√	µ	020

for 1 sec. Rotate

FM -DUP TSQL

145.870 020

. µ

-BANK-:----

-BNAME:

-MNAME:

-SKIP-:OFF >CLEAR

		Push	MR	for 1 sec.
			S.MW
FM						-DUP TSQL		AFC
----------------				MODE			FM ANL
.	µ	051		145 870
-BANK-:----
-BNAME:								PSKIP
-MNAME:
					√		µ	051
-SKIP-:OFF

>CLEAR

31