92

q Cutw Fold e Complete

Important operating instructions are summed up in this and the following page for your simple reference. By cutting along the line and folding on the dotted line, it will become a card sized operating guide which can easily be carried in a card case or wallet, etc.

<CUT HERE>

POCKET GUIDE 18

POCKET GUIDE

iR20

VFO mode selection

Push [VFO MHz] momentarily to select VFO mode.

Memory mode selection

Push [MR S.MW] momentarily to select memory mode.

Receive mode selection

Push [MODE SCAN] several times to select the desired mode.

Audio level setting

Rotate [L-DIAL](or push [Y]/ [Z]) to set the audio level.

Squelch level setting

While pushing [SQL], rotate [R- DIAL] to set the squelch level.

Frequency band selection

Push [BAND] several times, or while pushing [BAND], rotate [R- DIAL] to select the desired fre- quency band.

Tuning step selection

Push [9 TS], then rotate [R-DIAL]to select the desired tuning step.

Push [9 TS] again to return to the previous condition.

Single band and dualwatch selection

Push [DUALWATCH] for 1 sec. to toggle between single band and dualwatch operation.

Key lock function

Push [• LOCK] for 1 sec. to toggle the key lock function ON and OFF.

” appears when the lock function is in use.

Attenuator function

Push [ΩΩ ATT] to toggle the attenuator ON and OFF.

“ATT” appears when the attenuator is in use.

Frequency setting

qPush [VFO MHz] to select VFO mode.

wRotate [R-DIAL]to set the de- sired operating frequency.

Entering keypad directly can be selected the desired frequency.

Memory channel selection

q Push [MR S.MW] to select memory mode.

wRotate [R-DIAL]to set the de- sired memory channel.

Entering keypad directly can be selected the desired channel.

Memory bank channel selection q Push [MR S.MW] to select

memory mode.

wPush [BAND] several times, or while pushing [BAND], rotate [R- DIAL] to select the desired bank.

eRotate [R-DIAL]to select the desired bank channel.

Page 105
Image 105
Icom IC-R20 instruction manual Pocket Guide, IR20