Icom IC-R20 Inputs digit ‘5’ for frequency input, memory, Push for 1 sec. to enter the set mode

!2TONE SCAN KEY [4 T-SCAN]

T SCAN ➥ Inputs digit ‘4’ for frequency input, memory channel selection, etc.

➥Push for 1 sec. to start a tone scan. (p. 48)

!3FREQUENCY SKIP KEY [5 SKIP]

SKIP	➥ Inputs digit ‘5’ for frequency input, memory
	channel selection, etc.

➥Push for 1 sec. to turn the frequency skip function ON and OFF in VFO mode. (p. 39)

•“PSKIP” appears when the frequency skip function is in use.

➥Push for 1 sec. to set the memory channel as the following skip channel in memory mode in order. (p. 39)

•Skip channel — “SKIP” appears.

•Frequency skip channel — “PSKIP” appears.

•Non-skip channel — no skip indicator appears.

➥Push for 1 sec. to program a paused fre- quency as a skip frequency while scanning. (p. 39)

!4MEMORY NAME KEY [6 M.N]

M.N ➥ Inputs digit ‘6’ for frequency input, memory

6channel selection, etc.

➥Push for 1 sec. to turn the memory name indi- cation ON and OFF. (p. 30)

PANEL DESCRIPTION	1
!5AFC KEY [0 AFC]	1

➥ Inputs digit ‘0’ for frequency input, memory

AFC

channel selection, etc.

➥Push for 1 sec. to turn the AFC (Automatic Frequency Control) function ON and OFF. (p. 21)

!6TONE SQUELCH KEY [7 TONE]

TONE ➥ Inputs digit ‘7’ for frequency input, memory channel selection, etc.

➥Push for 1 sec. to activate the following tone squelch functions in order.

•Tone squelch — “TSQL” appears. (p. 45)

•Pocket beep — “TSQLS” appears. (p. 45)

•DTCS squelch — “DTCS” appears. (p. 45)

•DTCS beep — “DTCSS” appears. (p. 45)

•VSC function — “VSC” appears. (p. 45)

•No tone operation — no tone indicator appears.

!7SET MODE KEY [8 SET]

SET	➥ Inputs digit ‘8’ for frequency input, memory
	channel selection, etc.
	➥ Push for 1 sec. to enter the set mode.

4