Integra Contents, Configuring your DTR-6.4/5.4Advanced Settings, Remote controller, Appendix

Contents

Recording	50
Recording the input source (Rec Out selector)	50
Recording both the audio and video	51

Configuring your DTR-6.4/5.4 (Advanced Settings)

Configuring the speakers (DTR-6.4)	52
Setting the speaker distance from your normal listening
position	52
Calibrating the speaker levels	53
Configuring the speakers (DTR-5.4)	54
Setting the speaker distance from your normal listening
position	54
Calibrating the speaker levels	55
Input Setup	56
Adjusting the volume differences between components
(Intelligent Volume)	56
Configuring the listening modes frequently you use	57
Preference	58
Adjusting the headphones volume level	58
Setting the background color for OSD	58
Switching the OSD display mode	58
Changing the volume level display setting	58
Audio Adjust	59
Settings available when the listening mode is other than
“Direct” (for DTR-5.4) or other than “Direct,” “Pure
Audio” and “THX” (for DTR-6.4)	59
Setting available when you play mono, 2-channel or 96 kHz
format signal	60
Setting available when you play Dolby Digital format signal...	60
Setting available when you play Dolby Digital or DTS
format signal	60
Settings available when you set “DTS Neo:6” for your
listening mode	60
Settings available when you set “Dolby Pro Logic II Music”
for your listening mode	60
Settings available when you set an Integra-specific surround
mode for your listening mode	60
Settings available when you play monaural signal	61
Settings available when you set “Theater-Dimensional” for
your listening mode	61
Remote controller
Using remote controller	62
Overview	62
Calling up a preset radio station	62
Controlling an Onkyo cassette tape deck	62
Controlling an Integra/Onkyo DVD player	63
Controlling an Integra/Onkyo CD player	64
Controlling an Onkyo MD recorder	65
Entering a pre-programming code	66
Learning a pre-programming code	66
Pre-programming codes	67

Operating your programmed remote controller	68
DVD Mode (DVD Player Mode)	68
SAT Mode (Satellite Tuner Mode)	68
Cable Mode (Cable Mode)	68
VCR Mode (VCR Mode)	69
TV Mode (TV Mode)	69
Programming the commands of remote
controllers for other devices into the remote
controller	70
Programming procedure	70
Erasing the programmed command from one button	71
Erasing all the commands programmed under a Mode
button	71
Using the macro function	72
What is the macro function?	72
Programming the macro	72
Executing the macro	72
Erasing a macro from the Macro 1 (or 2) button	73
Erasing all commands and macros that have been
programmed	73
Appendix
Specifications (DTR-6.4)	74
Specifications (DTR-5.4)	75
Troubleshooting guide	76
POWER	76
SPEAKERS	76
FM/AM TUNER	76
VIDEO and AUDIO	77
REMOTE CONTROLLER	77
OTHER	77
If one of the messages shown below appears	78
Memo	79

5