Selecting the appropriate setting for your connection
/ /
/ 
Setup Return
Enter
Hardware Config
In this section, you will perform the initial settings for following scenarios.
•When connecting speakers to the ZONE 2 SPEAKERS terminals
•When using two surround back speakers
•When operating the remote controller using the IR IN terminal
•When you want to fix the TV Format setting to PAL or NTSC
If you want to perform these operations using the remote controller, first press the RCVR button.
1.Display the main menu.
Press the Setup button on the front panel or Setup button on the remote controller to display the main menu on the monitor and front display.
* Menu *****************
1.Hardware Config
2.Speaker Config 3.Speaker Distance 4.Level Calibration 5.Input Setup 6.Preference
ENTERQuit:SETUP
2.Use the 
and 
cursor buttons to select “1. Hardware Config” and then press the ENTER button.
The “Hardware Config” menu appears.
Return
Setup
CH |
|
| VOL |
|
|
| ||
Disc |
|
|
|
|
|
|
| |
Audio Sel |
|
| Muting | / | / | / | ||
A | Angle |
| Subtitle | M | ||||
TV / VCR | Level |
|
|
| ||||
|
|
|
|
|
| ENTER | ||
Random |
|
| Audio Adjust |
|
|
| ||
| Rec |
|
|
|
|
|
| |
|
| Input Selector |
|
|
|
| ||
| DVD |
|
| CD |
|
|
|
|
| V 1 | V 2 | TAP | TUN |
|
|
|
|
| V 3 | V 4 | V 5 | PH |
|
|
|
|
| 1 | 2 |
| 3 |
|
|
|
|
| Pure A | Direct |
| Stereo |
|
|
|
|
| 4 | 5 |
| 6 |
|
|
|
|
| SURR | THX |
| All ST |
|
|
|
|
| 7 | 8 |
| 9 |
|
|
|
|
| DSP | DSP |
|
|
|
|
| |
| +10 | 0 |
| Search |
|
|
|
|
| Display | Dimmer |
| Zone 2 |
|
|
|
|
|
|
| Enter |
|
|
|
| |
3.Use the 
and 
cursor buttons to select an item and then use the 
and 
cursor buttons to set the desired value.
a. Surr/Zone 2
If you connect the Zone 2 speakers to the ZONE 2 SPEAKERS terminals, set the Surr/Zone 2 setting to “Zone 2.”
Surr: In this setting, sound will not be output from the Zone 2 speakers which is connected to the ZONE 2 SPEAKERS terminals. In the main room,
Zone 2: In this setting, when you are not using the Zone 2, 6.1- channel playback will be available for the main room. However, while you use the Zone 2,
b. Surr Back (DTR-6.4 only)
Specify whether you use one surround back speaker or two.
1ch: Selects when you connect one surround back speaker to the SURROUND BACK SPEAKER terminals on the
2ch (PRE OUT): Selects when you connect two surround back speakers to the power amplifier connected to the SURR BACK PRE OUT terminals on the
Note:
Be sure to use either one or two surround back speakers. Connecting surround back speakers to both the SURROUND BACK SPEAKER terminals on the
c. IR IN Position
Use this setting when you have a remote control sensor connected to the IR IN terminal. The setting in this menu tells the
Main: Select when you are using the remote control sensor for operation with the remote controller in the main zone.
* Menu *****************
1.Speaker Config 1.Hardware Config 2.Speaker Distance
***********************
3.Level Calibration
|
| 4.Input Setup |
|
|
| ||
|
| a.Surr/Zone 2:Surr | |
|
| 5.OSD Setup | : 1ch |
|
| b.Surr Back | |
6.Preference |
| ||
|
| c.IR IN Position | |
|
|
| :Main |
|
| d.TV Format | :Auto |
* Menu *****************
1.Speaker Config |
|
1.Hardware Config | |
2.Speaker Distance | |
*********************** | |
3.Level Calibration | |
4.Input Setup | :Surr |
a.Surr/Zone 2 | |
5.OSD Setup |
|
b.IR IN Position | |
6.Preference | :Main |
| |
c.TV Format | :Auto |
Zone 2: Select when you are using the remote control sensor for operation with the remote controller in the remote zone (Zone 2).
d. TV Format
The default setting is “Auto,” which means that the television format is detected and automatically set by the
Quit:SETUP | Quit:SETUP |
4.Press the Return button to return to the main menu.
Press the Setup button on the front panel or Setup button on the remote controller to exit the Setup menu.
32
