Integra DTR-6.4/5.4 Selecting a listening mode DTR-6.4, Re-EQfunction for movies DTR-6.4only

Listening Modes

DTR-6.4

Listening mode buttons

RC-534M

RCVR

Mode

CH			VOL
Disc
Audio Sel			Muting
A	Angle		Subtitle M
TV / VCR		Level
Random			Audio Adjust
	Rec
	Input Selector
DVD			CD
V 1	V 2	TAP	TUN
V 3	V 4	V 5	PH
	1	2	3
Pure A		Direct	Stereo
	4	5	6
SURR		THX	All ST
	7	8	9
	DSP	DSP	Re-EQ
+10		0	Search
Display		Dimmer	Zone 2
-- / ---			Enter

Listening mode buttons

Re-EQ

Selecting a listening mode (DTR-6.4)

•Refer to pages 44 and 45 for more details of listening modes.

•Refer to page 45 for sources and listening modes.

•When playing Dolby Digital or DTS software, the listening mode will automatically change to Dolby Digital or DTS.

Tip:

You can set in advance a different listening mode for each input source. For more details, see page 57.

When using the remote controller, first press the RCVR Mode button before preceding to the step below.

Press one of the listening mode buttons to select the listening mode.

DTR-6.4

Remote controller	1	2	3
	Pure A	Direct	Stereo
	4	5	6
	SURR	THX	All ST
	7	8	9
	DSP	DSP	Re-EQ

Direct/Pure Audio (Direct, Pure A): Changes the listening mode for the signal type that is currently being input from the selected input source to the Direct listening mode. If pressed, the corresponding settings in the “Input Setup” menu for the selected input source is also changed. When the listening mode is set to Direct, you can switch between Direct and Pure Audio. When you select Pure Audio, the video signal is interrupted (the front panel display and OSD will be blacked out), and the PURE AUDIO indicator lights up.

When you are using the remote Zone (Zone 2), the Pure Audio setting will not work.

Note:

For Australian models, the monitor video coming from the COMPONENT VIDEO terminals cannot be turned off.

Stereo: Changes the listening mode for the signal type that is currently being input from the selected input source to the Stereo listening mode. If pressed, the corresponding settings in the “Input Setup” menu for the selected input source is also changed (see page 57).

Surround (SURR): Changes the listening mode for the signal type that is currently being input from the selected input source to the surround mode that matches the signal type (e.g., Dolby Pro Logic II, Dolby Digital, DTS, or DTS Neo:6). If pressed, the corresponding settings in the “Input Setup” menu for the selected input source is also changed (see page 57).

THX: Changes the listening mode to the THX listening mode.

Be aware that if surround back speakers are not connected, or if the Surr Back/Zone 2 setting of the Surr Back/Zone 2 Sub-menu is set to “Zone 2,” the THX Surround EX, DTS-ES Discrete 6.1, or DTS- ES Matrix 6.1 listening modes cannot be selected.

All ST (remote controller only): Changes the listening mode for the signal type that is currently being input from the selected input source to the All Ch Stereo listening mode. If pressed, the corresponding settings in the “Input Setup” menu for the selected input source is also changed (see page 57).

DSP: Changes the listening mode for the signal type that is currently being input from the selected input source as shown below.

Orchestra → Unplugged → Studio-Mix → TV Logic → All Ch Stereo → Mono → T-D → Mono Movie → Enhanced → Orchestra.

If pressed, the corresponding settings in the “Input Setup” menu for the selected input source is also changed (see page 57).

Each press of the DSP button on the remote controller switches the listening modes just like the DSP button on the DTR-6.4.

On the other hand, each press of the DSP button switches the listening modes in reverse order.

Re-EQ function for movies (DTR-6.4 only)

Re-EQ (re-equalization) takes the edginess or “brightness” out of your home cinema sound to compensate for the fact that sound mixed for theaters may sound too bright when played back through speakers in the home environment.

This can be set to either “On” or “Off.”

This function only works in the THX, Dolby Digital, Dolby Digital EX, Dolby Pro Logic II Movie, DTS, DTS-ES Discrete 6.1, DTS- ES Matrix 6.1, DTS Neo:6 Cinema, All Ch Stereo, Mono listening modes.

Note:

Dolby Pro Logic II Movie, DTS Neo:6 Cinema, Dolby Digital, and DTS are only enabled for multichannel playback.

46