Integra DTR-6.4/5.4 Specifications DTR-5.4, Amplifier Section, Tuner Section, General

Specifications (DTR-5.4)

AMPLIFIER SECTION		TUNER SECTION
Continuous average power output (FTC)		FM
All channels:	85 W per channel min. RMS at 8 Ω,	Tuning range:	87.5–108.0 MHz (50-kHz steps)
	2 channels driven from 20 Hz to 20	Usable sensitivity	11.2 dBf, 1.0 µV (75 Ω IHF)
	kHz with no more than 0.08% total	Mono:
	harmonic distortion.		0.9 µV (75 Ω DIN)
	110 W min. RMS at 6 Ω, 2 channels	Stereo:	17.2 dBf, 2.0 µV (75 Ω IHF)
	driven from 1 kHz with no more		23 µV (75 Ω DIN)
	than 0.1% total harmonic distortion.	50 dB quieting sensitivity	17.2 dBf, 2.0 µV (75 Ω)
Continuous power output (DIN)	120 W at 6 Ω	Mono:
Maximum power output (EIAJ)	150 W at 6 Ω	Stereo:	37.2 dBf, 20 µV (75 Ω)
Dynamic power output (stereo)	2 ⋅ 220 W at 3 Ω	Capture ratio:	2.0 dB
	2 ⋅ 165 W at 4 Ω	Image rejection ratio
	2 ⋅ 100 W at 8 Ω	USA & Canadian models:	40 dB
Total harmonic distortion:	0.08% at rated power	Australian models:	85 dB
	0.08% at 1 W output	IF rejection ratio:	90 dB
IM distortion:	0.08% at rated power	Signal-to-noise ratio
	0.08% at 1 W output	Mono:	76 dB
Damping factor:	60 at 8 Ω	Stereo:	70 dB
Input sensitivity and impedance		Alternate channel attenuation:	55 dB
LINE (CD, TAPE, DVD,	200 mV, 47 kΩ	Selectivity:	50 dB (DIN)
VIDEO 1-4):		AM suppression ratio:	50 dB
MULTICHANNEL INPUT		Total harmonic distortion
(FRONT L/C/R, SURROUND	200 mV, 47 kΩ	Mono:	0.2%
L/R):		Stereo:	0.3%
(SUBWOOFER):	36 mV, 47 kΩ	Frequency response:	30 Hz–15 kHz, ±1.0 dB
COAXIAL (DIGITAL):	0.5 Vp-p, 75 Ω	Stereo separation:	45 dB at 1 kHz
DVD, VIDEO 1, 2, 3, 4:	1 Vp-p, 75 Ω		30 dB at 100 Hz–10 kHz
	1 Vp-p, 75 Ω (Y)	AM
	0.28 Vp-p, 75 Ω (C)	Tuning range
COMPONENT VIDEO 1, 2:	1 Vp-p, 75 Ω (Y)	USA & Canadian models:	530 to 1,710 kHz (10-kHz steps)
	0.7 Vp-p, 75 Ω (PB, PR)	Australian models:	522 to 1,611 kHz (9-kHz steps)
Output level and impedance	200 mV, 470 Ω	Usable sensitivity:	30 µV
Rec out (TAPE, VIDEO 1, 2):		Image rejection ratio:	40 dB
Line out:	100 mV, 470 Ω (Zone 2)	IF rejection ratio:	40 dB
Pre out:	1 V, 470 Ω	Signal-to-noise ratio:	40 dB
VIDEO (VIDEO 1, 2,	1 Vp-p, 75 Ω	Total harmonic distortion:	0.7%
MONITOR OUT):		GENERAL
	1 Vp-p, 75 Ω (Y)
		Power supply
	0.28 p-p, 75 Ω (C)
COMPONENT VIDEO OUT:	1 Vp-p, 75 Ω (Y)	USA & Canadian models:	AC 120 V, 60 Hz
	0.7 Vp-p, 75 Ω (PB, PR)	Australian models:	AC 230–240 V, 50 Hz
Frequency response:	10 Hz to 100 kHz: +1/–3 dB	Power consumption
	(Direct mode)	USA & Canadian models:	5.3 A
Tone control		Australian models:	550 W
Bass:	±10 dB at 50 Hz	Dimensions (W ⋅ H ⋅ D):	17-1/8" ⋅ 6-7/8" ⋅ 17"
Treble:	±10 dB at 20,000 Hz	Weight	435 ⋅ 175 ⋅ 432 mm
Signal-to-noise ratio (stereo)
CD/Tape:	106 dB (IHF A, 0.5 V input)	USA & Canadian models:	26.9 lbs. (12.2 kg)
Muting:	–50 dB	Australian models:	13.0 kg (28.7 lbs.)
		REMOTE CONTROLLER
		Transmitter:	Infrared
		Signal range:	Approx. 16 ft., 5 meters
		Power supply:	Two “AA” batteries (1.5 V ⋅ 2)

Specifications and features are subject to change without notice.

75