
Specifications (DTR-6.4)
AMPLIFIER SECTION |
| TUNER SECTION |
| |
Continuous average power output (FTC) | FM |
| ||
All channels: | 100 W per channel min. RMS at 8 Ω, | Tuning range: | ||
| 2 channels driven from 20 Hz to 20 | Usable sensitivity | 11.2 dBf, 1.0 µV (75 Ω IHF) | |
| kHz with no more than 0.08% total | Mono: | ||
| harmonic distortion. |
| 0.9 µV (75 Ω DIN) | |
| 125 W min. RMS at 6 Ω, 2 channels | Stereo: | 17.2 dBf, 2.0 µV (75 Ω IHF) | |
| driven from 1 kHz with no more |
| 23 µV (75 Ω DIN) | |
| than 0.1% total harmonic distortion. | 50 dB quieting sensitivity | 17.2 dBf, 2.0 µV (75 Ω) | |
Continuous power output (DIN) | 130 W at 6 Ω | Mono: | ||
Maximum power output (EIAJ) | 160 W at 6 Ω | Stereo: | 37.2 dBf, 20 µV (75 Ω) | |
Dynamic power output (stereo) | 2 ⋅ 230 W at 3 Ω | Capture ratio: | 2.0 dB | |
| 2 ⋅ 170 W at 4 Ω | Image rejection ratio |
| |
| 2 ⋅ 115 W at 8 Ω | USA & Canadian models: | 40 dB | |
Total harmonic distortion: | 0.08% at rated power | Australian models: | 85 dB | |
| 0.08% at 1 W output | IF rejection ratio: | 90 dB | |
IM distortion: | 0.08% at rated power |
| ||
| 0.08% at 1 W output | Mono: | 76 dB | |
Damping factor: | 60 at 8 Ω | Stereo: | 70 dB | |
Input sensitivity and impedance | 2.5 mV, 47 kΩ | Alternate channel attenuation: | 55 dB | |
PHONO: | Selectivity: | 50 dB (DIN) | ||
LINE (CD, TAPE, DVD, | 200 mV, 47 kΩ | AM suppression ratio: | 50 dB | |
VIDEO | Total harmonic distortion |
| ||
MULTICHANNEL INPUT |
| Mono: | 0.2% | |
(FRONT L/C/R, SURROUND | 200 mV, 47 kΩ | Stereo: | 0.3% | |
L/R): | Frequency response: | 30 | ||
(SUBWOOFER): | 36 mV, 47 kΩ | Stereo separation: | 45 dB at 1 kHz | |
COAXIAL (DIGITAL): | 0.5 |
| 30 dB at 100 | |
DVD, VIDEO 1, 2, 3, 4: | 1 | AM |
| |
| 1 | Tuning range |
| |
| 0.28 | USA & Canadian models: | 530 to 1,710 kHz | |
COMPONENT VIDEO 1, 2: | 1 | Australian models: | 522 to 1,611 kHz | |
| 0.7 | Usable sensitivity: | 30 µV | |
Output level and impedance | 200 mV, 470 Ω | Image rejection ratio: | 40 dB | |
Rec out (TAPE, VIDEO 1, 2): | IF rejection ratio: | 40 dB | ||
Line out: | 100 mV, 470 Ω (Zone 2) | 40 dB | ||
Pre out: | 1 V, 470 Ω | Total harmonic distortion: | 0.7% | |
VIDEO (VIDEO 1, 2, | 1 | GENERAL |
| |
MONITOR OUT): |
| |||
Power supply |
| |||
| 1 |
| ||
| 0.28 | USA & Canadian models: | AC 120 V, 60 Hz | |
COMPONENT VIDEO OUT: | 1 | Australian models: | AC | |
| 0.7 | Power consumption |
| |
Phono overload: | 70 mV RMS at 1 kHz, 0.5% T.H.D. | USA & Canadian models: | 6.0 A | |
Frequency response: | 10 Hz to 100 kHz: | Australian models: | 620 W | |
| (Direct mode) | Dimensions (W ⋅ H ⋅ D): | ||
RIAA deviation: | 20 Hz to 20 kHz: ±0.8 dB | Weight | 435 ⋅ 175 ⋅ 432 mm | |
Tone control |
|
| ||
Bass: | ±10 dB at 50 Hz | USA & Canadian models: | 27.1 lbs. (12.3 kg) | |
Treble: | ±10 dB at 20,000 Hz | Australian models: | 13.1 kg (28.9 lbs.) | |
| REMOTE CONTROLLER |
| ||
Phono: | 80 dB (IHF A, 5 mV input, Direct mode) |
| ||
Transmitter: | Infrared | |||
Line: | 106 dB (IHF A, 0.5 V input, Direct mode) | |||
Signal range: | Approx. 16 ft., 5 meters | |||
Muting: | ||||
Power supply: | Two “AA” batteries (1.5 V ⋅ 2) | |||
|
|
Specifications and features are subject to change without notice.