Integra DTR-6.4/5.4 Controlling an Onkyo MD recorder, Using remote controller, Rec : Record

Using remote controller

RC-534M

Controlling an Onkyo MD recorder

The connector of the Onkyo MD recorder must be connected to the DTR-6.4/5.4 (see page 28).

1.Press the SAT/MD Mode button.

The SAT/MD Mode button lights.

2.Press the desired operation button.

The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo MD recorder.

On

CH

Disc

Audio Sel

Standby

SAT/MD Mode

VOL	VOL
Muting

Operation buttons:

On: Turns on and off MD player (same as Standby button on the remote controller)

: Track down

: Track up

: Play

: Stop

: Skip backward

TV / VCR	Angle		Subtitle		Muting
A				M
		Level
Random			Audio Adjust		MD
					operation
	Rec
	Input Selector				buttons
DVD			CD
V 1	V 2	TAP	TUN
V 3	V 4	V 5	PH
	1	2	3
Pure A		Direct	Stereo
	4	5	6		Numeric keys
SURR		THX	All ST
	7	8	9
	DSP	DSP	Re-EQ
+10		0	Search		Enter
--	/ ---	Dimmer	Enter
Display			Zone 2

: Skip forward

Rec ●: Record

: Pause

: Eject

1 to 9, 0, --/---: Numeric keys

ENTER: Enters the settings

You may also use the following buttons:

VOL : Adjusts volume at DTR-6.4/5.4

Muting: Activates muting function at DTR-6.4/5.4

Note:

The SAT/MD button is used for operating satellite tuners and Onkyo MD recorders. Be aware that if you enter the preset code for a satellite tuner as shown on page 66, then this button cannot be used to operate Onkyo MD recorders.

If this is the case, to operate an Onkyo MD recorder, you must first erase the satellite tuner code by following the directions given in “Erasing all the commands programmed under a Mode button” on page 71.

65