Integra DTR-6.4/5.4 Input Setup, Configuring the listening modes frequently you use, Notes

Input Setup

Configuring the listening modes frequently you use

You can preset the listening mode for individual input source.

The listening mode will be reset to the mode you set here after turning on the DTR-6.4/5.4 even if you change the listening mode using the Listening Mode buttons.

1. Select the desired input source.

2.Press the Setup button on the front panel or on the remote controller to display the main menu on the monitor and the front display.

The main menu appears.

* Menu *****************

1.Hardware Config 2.Speaker Config 3.Speaker Distance 4.Level Calibration

5.Input Setup

6.Preference

ENTERQuit:SETUP

3.Use the and cursor buttons to select “5. Input Setup” and then press the ENTER button.

The “Input Setup” menu appears.

4.Press the / button to choose the input source (d. - g.) for which you set the listening mode.

5.Input Setup

****Input:DVD *******

d.Analog/PCM/D.F.2ch :Last Valid

e.PCM fs=96k

:Last Valid

f.D.F. :Last Valid

g.D.F.Mono:Last Valid

Quit:SETUP

d. Analog/PCM/D. F. 2ch source

This sets the listening mode for analog, PCM, or Digital Format 2ch sources.

Analog sources consist of LP records, FM and AM broadcasts, cassette tapes, and the such. PCM (Pulse Code Modulation) is one form of digital audio signals and is recorded directly onto compact discs and DVDs without compression.

Digital format 2ch is a 2-channel digital source, such as DVD or LD which is recorded in 2-channel Dolby Digital format (but for PCM).

e. PCM fs 96kHz source

This sets the listening mode for Digital PCM sources recorded with a sampling rate of 96 kHz.

f. Digital Format source

This sets the listening mode for Dolby Digital or DTS sources.

g. D. F. Mono source

This setting allows you to select the listening mode for digital mono source.

Digital format mono is monaural digital source, such as DVD or LD which is recorded in Dolby Digital mono format.

When you set this setting to “Last Valid”, the listening mode will be the one you used before.

Notes:

•For “e. PCM fs 96kHz source” “f. Digital Format source” “g.

D. F. Mono source”

These settings will be disabled if “----” is selected at the

“Digital Input” setting.

•For “e. PCM fs 96kHz source” “g. D. F. Mono source”

The selected listening mode will be applied to all the input source signals of the same type.

5.Press the Return button to return to the main menu.

Press the Setup button on the front panel or Setup button on the remote controller to exit the Setup menu.

57