8086
ABSOLUTE MAXIMUM RATINGS*
Ambient Temperature Under Bias ÀÀÀÀÀÀ0§C to 70§C Storage Temperature ÀÀÀÀÀÀÀÀÀÀb65§C to a150§C
Voltage on Any Pin with
Respect to GroundÀÀÀÀÀÀÀÀÀÀÀÀÀÀb1.0V to a7V
Power DissipationÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ2.5W
NOTICE: This is a production data sheet. The specifi- cations are subject to change without notice.
*WARNING: Stressing the device beyond the ‘‘Absolute Maximum Ratings’’ may cause permanent damage. These are stress ratings only. Operation beyond the ‘‘Operating Conditions’’ is not recommended and ex- tended exposure beyond the ‘‘Operating Conditions’’ may affect device reliability.
D.C. CHARACTERISTICS (8086: TA e 0§C to 70§C, VCC e 5V g10%)
Symbol | Parameter | Min | Max | Units | Test Conditions | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
VIL | Input Low Voltage | b0.5 | a0.8 | V | (Note 1) | ||||||
VIH | Input High Voltage | 2.0 | VCC a 0.5 | V | (Notes 1, 2) | ||||||
VOL | Output Low Voltage |
| 0.45 | V | IOL e 2.5 mA | ||||||
VOH | Output High Voltage | 2.4 |
| V | IOH e b 400 mA | ||||||
ICC | Power Supply Current: 8086 |
| 340 |
| TA e 25§C | ||||||
|
|
|
|
|
|
|
| 360 | mA | ||
|
|
|
|
|
|
|
| 350 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
ILI | Input Leakage Current |
| g10 | mA | 0V s VIN s VCC (Note 3) | ||||||
ILO | Output Leakage Current |
| g10 | mA | 0.45V s VOUT s VCC | ||||||
VCL | Clock Input Low Voltage | b0.5 | a0.6 | V |
| ||||||
VCH | Clock Input High Voltage | 3.9 | VCC a 1.0 | V |
| ||||||
CIN | Capacitance of Input Buffer |
| 15 | pF | fc e 1 MHz | ||||||
| (All input except |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| AD0 – AD15, RQ/GT) |
|
|
|
| ||||||
CIO | Capacitance of I/O Buffer |
| 15 | pF | fc e 1 MHz | ||||||
|
|
|
|
|
|
|
|
|
| ||
| (AD0 – AD15, RQ/GT) |
|
|
|
| ||||||
NOTES:
1.VIL tested with MN/MX Pin e 0V. VIH tested with MN/MX Pin e 5V. MN/MX Pin is a Strap Pin.
2.Not applicable to RQ/GT0 and RQ/GT1 (Pins 30 and 31).
3.HOLD and HLDA ILI min e 30 mA, max e 500 mA.
14
