Intel IQ80219 manual Getting Started, Kit Content, Hardware Installation

Getting Started 2

The IQ80219 is a software development environment for Intel® 80219 general purpose PCI processor (80219).

2.1Kit Content

The IQ80219 Kit contains the following items:

•Intel® IQ80219 evaluation platform board.

•CodeLab* Development Environment from Accelerated Technology Incorporated*.

•JTAG Emulation unit.

•Serial Cable.

•Evaluation Software Bundle.

2.2Hardware Installation

Warning: Static charges can severely damage the boards. Be sure you are properly grounded before removing the board from the anti-static bag.

2.2.1First-Time Installation and Test

For first-time installation, visually inspect the IQ80219 for any damage made during shipment. Follow the host system manufacturer instructions for installing a PCI adapter. The board is a full-length PCI/PCI-X adapter and requires a PCI/PCI-X slot free from obstructions. The extended height of the board requires the cover of the PC to be kept off.

2.2.2Power and Backplane Requirements

The IQ80219 requires a 3.3 V supply coming through the PCI/PCI-X primary connector. The board can be plugged into either a backplane or a desktop PCI/PCI-X slot. When using a backplane, an ATX rated power supply is required. The IQ80219 only draws from the 3.3 V line of the power supply. Most ATX power supply units (PSUs) regulate off the 5 V signal. When there is nothing drawing from the 5.5 V signal most ATX PSU do not supply the 3.3 V correctly. To overcome this, it is recommended to put a load on the 5.5 V line of the PSU. An old IDE Hard drive can be used for this.

Caution: When plugging the power supply into the backplane, make sure that the power supply is disconnected from the mains. Most ATX PSUs supply 5 V standby current even when turned Off, backplane damage is possible.

Board Manual 19