Intel IQ80219 manual Getting Started

Intel® IQ80219 General Purpose PCI Processor Evaluation Platform

Getting Started

To bring up a HyperTerminal session on a Win32 platform: Go to Start, Programs, Accessories, Communications, HyperTerminal

•HyperTerminal setup screens:

—“Connection Description” Panel:

•Enter name.

—“Connect To” Panel:

•Select host com2 port (or whichever port you are using).

—Port Settings:

•Bits per second: 115200

•Data Bits: 8

•Parity: none

•Stop Bits: 1

•Flow Control: none

—Start HyperTerminal:

•Select Call from HyperTerminal panel.

—Reset or power up IQ80219 board.

—The Host screen reads:

RedBoot(tm) debug environment - built dd:mm:yy, Mon dd 2001

Platform: IQ80321

Copyright (C) 2000, Red Hat, Inc.

RAM: 0xa0000000-0xa2000000

FLASH: 0x00000000 - 0x00800000, 64 blocks of 0x00020000 bytes each.

IP: 192.168.0.1, Default server: 0.0.0.0

RedBoot>

For further information on the GDB/Insight Debugger, refer to the content of the GNUPro CD and/or the GNUPro Debugging Tools manual. This setup assumes that Redboot is Flashed on the board.

Board Manual 27