Back Cane

BACK/SEAT

PROCEDURE 6

BACK/SEAT

INSTALLING/REPLACING SEAT POSITIONING STRAPS (FIGURE 5)

INSTALLING

1.Remove the hex screw and locknut that secures the back cane to the back plate.

2.Position the seat positioning strap against the back plate.

3.Install the hex screw through the seat positioning strap, coved spacers and back cane.

4.Securely tighten the seat positioning strap to the wheelchair with the locknut.

5.Repeat STEPS 1-4 for opposite side.

REPLACING

1.Remove the hex screw, locknut and seat positioning strap from the back plate of the wheelchair frame.

2.Discard EXISTING seat positioning strap.

3.Install the NEW seat positioning strap to the wheelchair. Refer to INSTALLING SEAT POSITION- ING STRAPS in this procedure of the manual.

Back Plate

Locknut

Seat Positioning Strap

Coved Spacers

Hex Screw

FIGURE 5 - INSTALLING/REPLACING SEAT POSITIONING STRAPS

Solara™

42

Part No. 1080556 Rev. I

Page 42
Image 42
Invacare 1080556 manual INSTALLING/REPLACING Seat Positioning Straps Figure, Replacing