RECLINER BACK OPTION | PROCEDURE 10 |
7.Install the end of the recliner cable onto the actuator (DETAIL “B”). NOTE: Make sure the recliner cable is positioned in the slot in the actuator.
8.Secure the recline cables to the back canes using NEW tie wraps (DETAIL “C”).
9.Repeat REMOVING EXISTING RECLINER CABLES and INSTALLING NEW RECLINER CABLES for the opposite recliner cable, if necessary.
10.Test the operation of the gas cylinders. Refer to ADJUSTING THE GAS CYLINDERS in this section of the manual.
RECLINER BACK
Recline
Trigger
Release
Lever
Recliner
Cable
Cable
Locking Nut
DETAIL "A"
Locknut
Recliner
Cable 
Actuator Housing
Cable
Locking
Nut
DETAIL "B"
Fitting
Cable
Locking
Collar
Mounting
Screw
Back
Cane
Tie
Wraps
Trigger DETAIL "C"
Release
Lever
Operating
RIGHT Gas
Cylinder Adjustable Angle
Stroller Handle
Tie
Wrap
Here
Recline
Cable
“X” Pattern
Trigger
Release
Lever
Operating
LEFT Gas
Cylinder
OPTION
FIGURE 3 - REPLACING THE RECLINER CABLES
Part No. 1080556 Rev. I | 59 | Solara™ |
