RECLINER BACK OPTION
PROCEDURE 10 | RECLINER BACK OPTION | |
|
|
|
ADJUSTING THE GAS CYLINDERS (FIGURE 5)
WARNING
Both gas cylinders MUST be operational and adjusted properly BEFORE using the recliner. DO NOT operate the recliner if only one (1) of the gas cylinders is operational or adjusted properly.
DETERMINING NECESSARY ADJUSTMENTS
NOTE: The gas cylinders are controlled by the trigger release levers mounted on the opposite sides of the gas cylinders. The RIGHT trigger release lever controls the LEFT gas cylinder, and the LEFT trigger release lever controls the RIGHT gas cylinder.
Refer to the following chart and DETAIL “B” of FIGURE 5 to determine the necessary adjust- ments:
Action | NECESSARY | |
ADJUSTMENTS | ||
|
| |
Back releases WITHOUT |
| |
squeezing EITHER trigger | Adjust the LEFT AND | |
release lever. | ||
RIGHT gas cylinders | ||
(Actuator too LOW.) | ||
| ||
|
| |
Back DOES NOT release |
| |
while squeezing BOTH | Adjust the LEFT AND | |
trigger release levers. | ||
RIGHT gas cylinders. | ||
(Actuator too HIGH.) | ||
| ||
|
| |
Back releases while squeezing |
| |
the LEFT trigger release lever | Adjust the LEFT gas | |
ONLY. | ||
cylinders ONLY. | ||
(Actuator too LOW.) | ||
| ||
|
| |
Back releases while squeezing |
| |
the RIGHT trigger release | Adjust the RIGHT gas | |
lever ONLY. | ||
cylinders ONLY. | ||
(Actuator too LOW.) | ||
|
PERFORMING ADJUSTMENTS
WARNING
Both gas cylinders MUST be operational and adjusted properly BEFORE using the recliner. DO NOT operate the recliner if only one (1) of the gas cylinders is operational or adjusted properly.
1.To adjust the LEFT gas cylinder:
Loosen the cable locking nut that secures the cable adjusting nut in place.
2.Turn the cable adjusting nut one (1) of two (2) ways:
Solara™ | 62 | Part No. 1080556 Rev. I |
