Invacare 1080556 manual INSTALLING/REMOVING the Stroller Handles Figure, Installing, Removing

BACK/SEAT PROCEDURE 6

INSTALLING/REMOVING THE STROLLER HANDLES (FIGURE 2)

INSTALLING

1.Remove the plug buttons from both back canes, if necessary.

2.Slide the stroller handle into the back canes.

3.Align the mounting holes of the stroller handle and the back canes.

4.Press the button on the quick-release pin and insert the quick-release pin through the back cane and stroller handle.

5.Release the button on the quick-release pin.

6.Pull on the stroller handle to make sure it is locked securely in place.

REMOVING

1.Push in the button of the quick-release pins.

2.Pull out the quick-release pins that secures the stroller handle to the back canes.

3.Remove the stroller handle from the wheelchair and discard.

4.Install the NEW stroller handle. Refer to INSTALLING THE STROLLER HANDLES in this procedure of the manual.

Stroller Handle

Mounting

Holes

Back Cane

Button

Quick-Release Pin

FIGURE 2 - INSTALLING/REMOVING THE STROLLER HANDLES

BACK/SEAT

Part No. 1080556 Rev. I 39 Solara™