Invacare 1080556 manual Contracture Footplate Height Adjustment Figure, Bilateral Contracture

Models: 1080556

1 80
Download 80 pages 57.47 Kb
Page 69
Image 69

CONTRACTURE FOOTPLATE OPTION

PROCEDURE 11

 

 

 

CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT (FIGURE 8)

BILATERAL CONTRACTURE

1.Remove the mounting screw, two (2) coved washers, washer and locknut that secure the footplate bracket to the contracture support.

2.Move the footplate bracket UP/DOWN to achieve desired height.

3.Align the mounting hole in the footplate bracket with one (1) of seven (7) mounting holes on the contracture support.

4.Secure the footplate bracket to the contracture support with the mounting screw, two (2) coved washers, washer and locknut. Securely tighten.

5.If necessary, repeat STEPS 1-4 on remaining contracture footplate.

CONTRACTURE PLATFORM

1.Loosen, but do not remove the two (2) hex screws and locknuts that secure the contrac- ture platform to the upper support.

2.Slide the contracture platform to the desired height.

3.Tighten the two (2) hex screws and locknuts that secure the contracture platform to the upper support.

CONTRACTURE FOOTPLATE OPTION

BILATERAL CONTRACTURE

CONTRACTURE PLATFORM

Mounting

Holes

Lock Nut

Washers

Contracture Support

Mounting Screws

Coved

Washers

Footplate

Bracket

Upper Support

Locknuts

Hex Screws

Contracture

Platform

FIGURE 8 - CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT

Part No. 1080556 Rev. I

69

Solara™

Page 69
Image 69
Invacare 1080556 manual Contracture Footplate Height Adjustment Figure, Bilateral Contracture